top of page
About

ABOUT

DDG BIM Services is a part of the Digital Design Group. We believe in the quality
               we deliver and work together to bring it to the next level

WHAT WE DO

At DDG, we deliver comprehensive Building Information Modeling (BIM) services that span through the stages of planning, designing, construction, and management across the Architectural, Structural, Engineering, and Construction (AEC) industries. Further to that, we generate Navis works models to perform clash detection for MEP coordination. Despite the 3D modeling, our BIM team offers further dimensions such as 4D & 5D BIM services (Quantity take-off), coordination, Revit family creation and laser scan to BIM services. We use the virtual world to identify and correct potential risks that arise. By being completely prepared for your project before construction begins, we can reduce the number of problems you face.

WHY US

DDG BIM Services offers diverse solutions in BIM Drafting Services, such as Architectural BIM Modeling, Structural BIM Modeling, and MEP BIM Modeling. Our extended expertise eases the collaboration with owners, developers, architects and contractors providing services in MEP Coordination, Modeling, Drafting, Point Cloud Modeling and Facility Data Management. With more than 2 decades of hands-on experience in Hospitals, Institutional, Commercial, Residential, Industrial, Casinos and Airports Projects, our key players recognize the trending demand of the AECO industry, which allows us to overcome any challenges that come our way. With a highly-skilled resource team, we assure a high value of quality, reliability, transparency, cost-effectiveness, and deadline achievement in our project delivery.

We are building the world digitally, bit by bit 
Services

SERVICES

ARCHITECTURAL
BIM SERVICES
PLUMBING
DETAILING
FIRE PROTECTION
DETAILING
STRUCTURAL
BIM SERVICES
HVAC
DETAILING
FABRICATION
SPOOLING
POINT CLOUD
SERVICES
MECHANICAL PIPING
DETAILING
ELECTRICAL
DETAILING
REVIT FAMILY
CREATION
SOLIDWORKS
SERVICES
ARCHITECTURAL 
BIM SERVICES

DDG provides complete Architectural BIM Services in the USA for Architectural firms, General Contractors, Construction Companies, and Realtors. Using 2D layout plans and elevations as a starting point, we create entire Architectural building models to exact standards and specifications. Having a vast experience in the BIM market, our experts will develop a top-notch 3D architectural model at LOD 100 to LOD 500 Level.

Our Architectural BIM Services includes,​

●      Architectural modeling 2D & 3D drafting and detailing

●      Co-ordination model

●      LOD 300, LOD 500 model

         Drawing creation (Shop drawing, Millwork drawing, and Construction

●      document set

●      Parametric Family creation

●      Underground modeling (Shoring and site)

●      Facade modeling

●      Landscaping modeling

●      BIM Facility management

●      As-Built Scan to BIM conversion. (Point cloud conversion)

VIEW MORE

With extensive experience in the 3D modeling service, our architectural models excel in perfection and use real-world data and aspects. The model assures the effectiveness and error reduction during the construction phase, which leads to the reduction of project cost and project time with affordable BIM services. Our Architectural production team specializes not only in Autodesk Revit but also in AutoCAD, Illustrator, Photoshop, Lumion, Sketch Up and 3ds Max.

Our services extend to complex and parametric Revit family creation, clash detection and increased coordination. Any changes could be accommodated before the construction begins; hence the element parameters can be managed quickly and efficiently. Our assistance also adds on to the rendering services and point cloud creation. Our BIM Modelers renders comprehensive architectural 3D modeling services in each phase of client requirements such as planning, designing, building and maintenance with multi-disciplinary collaboration.

Architectural
STRUCTURAL 
BIM SERVICES

DDG provides complete Structural BIM Services in the USA for Structural firms, General Contractors, Construction Companies, and Realtors. Using 2D layout plans and elevations as a starting point, we create entire Structural building models to exact standards and specifications. Having a vast experience in the BIM market, our experts will develop a top-notch 3D structural model at LOD 100 to LOD 500 Level.

Our Structural BIM Services includes,​

●      Structural BIM Modeling

●      BIM Models for Coordination

●      Parametric Library Creation

●      Family Creation

●      Point cloud conversion

●      Construction Documentation

●      Concrete Lift Drawings

VIEW MORE

DDG provides an absolute Structural BIM Service that will accelerate comprehensive design analysis and evaluation that leads to flexibility in the management of Structural BIM. We believe that Structural Engineering Services requires knowledge of local industry standards, innovative thinking, extensive design experience, and consistent training & development. We support our clients in conceptual, preliminary and detailed fabrication projects maintaining international standards in quality and helping our clients reduce project schedules as well as ensure cost-effectiveness. Also, we help our clients on-site with a reduced burden of change orders and efficient material tracking during the construction phase.

DDG has extensive experience in fabrication, erection/layout and shop drawings for pre-cast, steel and poured-in-place structures and post-tensioned concrete systems. We provide the client with value-engineered structures through our knowledge and experience in various construction methodologies. Our valuable service provides point cloud creation, collision detection, collaboration and generation of the Navisworks model. In spite of that, we will create a comprehensive set of concrete lift drawings incorporating pour break locations, embeds from various trades, MEP block-outs and accessories required from various formwork systems. 

Concrete Lift Drawings

​Concrete lift drawings are created to communicate all the necessary information regarding a concrete pour to the field crew.  To get all of the right information into the drawings, the entity creating the lift drawings needs to effectively communicate with the design team, the concrete contractor team members, other subcontractors, and the general contractor. DDG BIM service is key to make sure the correct and current information is represented on the drawings.

Structural
MECHANICAL PIPING
DETAILING

DDG mechanical piping modeling service includes the creation and use of coordinated, consistent and computable information. We create extremely skilled drafting services to all kinds of industrial, commercial and residential industries. Our BIM models follow specified standards to ensure the certainty of geometry, workflows, and scheduling. More than 2 decades of hands-on experience in BIM, we are able to handle any issue in it and we are able to bring a solution for it by our highly experienced team.

Our Mechanical Piping BIM Services includes,

●      Mechanical piping 3D Bim Model

●      Compressed air and medical gas system drafting services

●      Sleeve / Penetration Drawings

●      Equipment Schedule and modeling

●      Piping Spool Drawings

●      Shop drawing, As-built, specification and coordination

●      Isometrics, Riser diagrams, details, schematics, and schedules

VIEW MORE

Our BIM models follow specified standards to ensure the certainty of geometry, workflows, and scheduling. The Mechanical rooms that we create are perplexing spaces containing chillers, warm exchangers, pressure vessels, control valves, stand funnels, swing-jolt conclusion, sterile, boilers, and conduits. In our procedure, we break down the whole framework design and illustrations to give the very much prepared model consideration of the various parts of conflicts, get to spaces, future repairs and so on. Notwithstanding that, we may propose alterations in the game plan of gear and channels, their area and separating to achieve the coveted outcomes. Also, we offer services such as spool drawing, family creation, BOQ of materials, collision detection and point cloud creation.

Mechanical
PLUMBING
DETAILING

With our BIM services, one can facilitate 3D visualization of all kinds of plumbing related elements in a building. We have great prowess in integrating Plumbing Drafting and Plumbing Detailing that spans from configuration to drafting till roughing. Whether it is fabrication drawing, fitting, quantity estimation, etc, we provide all solutions to our clients.​​

Our Plumbing BIM Services includes,

●      Plumbing and Drainage Drafting Services

●      Underground domestic utility modeling

●      BIM modeling of the sanitary fixture

●      Sleeve / Penetration Drawings

●      Equipment Schedules

●      Piping Spool Drawings

●      Shop drawing, As-built, specification and coordination

●      Isometrics, Riser diagrams, details, schematics, and schedules

VIEW MORE

DDG creates 3D plumbing models that result in an overall cost reduction along with boosting productivity on construction sites. We try to deliver the best solution and technological expertise that enables our long list of customers to develop faith in us in matters of quality and affordability. Through implementing BIM on their projects, plumbing contractors can immensely cut down on the waste and reduce rework during construction. It enhances the easiness in construction scheduling and reduction of collision errors and even makes it easier to track the material at an early stage.

​

We create 3D models of all domestic utilities like water, sanitation, and gas, including the underground sections. Our experts, during the conversion of design into the 3D model, assign the slope of sanitary pipes and check the constructibility of underground utilities. The converted BIM models track coordination and checks for the interference of any elements of MEP. Our services also extend to family creation of all plumbing fixtures, point cloud creation, pipe spool drawing, and sleeve penetration drawing.

HVAC
DETAILING

DDG is one of the leading HVAC (Heating, Ventilation, and Air Conditioning) BIM company in the USA that understands the requirements of the modern HVAC market. Our in-house BIM modelers are specialized in 3D modeling and drafting services for large scale commercial, residential and retail projects.

Our HVAC BIM Services includes,​

●      Equipment general arrangement plan (AHU, Chiller, CT, Pumps, etc.) including detailed sections

●      Mechanical Equipment Modeling as per submittal/cut-sheet provided

●      Mechanical Equipment Detailing (sections and isometric)

●      Mechanical Components Modeling (with connections)

●      Mechanical Duct and Duct Fittings Modeling

●      Ducting plan, section, and details

●      BOQ of Ducts, Duct Fittings, Mechanical Equipment, Diffusers, Grills, etc.

●      Parametric modeling and library creation of HVAC components.

VIEW MORE

As a technology-first company, our team of skilled HVAC personnel gets every detail in line for maximum accuracy and onsite compatibility. We continuously strive to deliver high-quality Building Information Modeling services for HVAC contractors, fabricators, and manufacturers. We deliver full-service Mechanical HVAC solutions that incorporate information-rich graphical models that collaborate with the requirements of your project.

Our service includes the creation of fully coordinated 3D models of all HVAC systems along with Mechanical duct, equipment modeling, point cloud creation and library creation of HVAC components. We pay special attention to Clash Detection for coordinated Architectural and Structural models. We also use Revit in-hands capabilities of auto-calculations and duct sizing to avail maximum efficiency.

Plumbing
HVAC
ELECTRICAL
DETAILING

With adequate proficiency in modeling, DDG upholds the client’s anticipation capability of potential issues wide ahead during the construction phase. We Builts various electrical assets through high quality and information-rich models.

Our Electrical BIM Services includes,​

●      3D Electrical Building Information Modeling with Constructability Review/Analysis

●      Modeling of Power, Data & Communication Systems

●      Modeling of Cable Trays and Conduits as per the given layout

●      Preparation of Lighting & Power Circuit Drawings

●      Electrical Lighting Fixtures Modeling

●      Electrical Room Modeling

●      Electrical Coordination and Clash Resolution

●      Point cloud conversion

●      BOQ of Electrical Equipment

VIEW MORE

The service availed from DDG guides you through all phases of the construction with a huge redemption of time, effort and investment. The Coordination visuals or models designed by our MEP personnel, are completely free from clashes with other constructional structures. Our modeling part incorporates electrical equipment, conduits, cable trays, lighting fixtures, communication and data transmission devices, network routing, etc. Despite that, with our Pre-fabrication BIM Model, we can easily produce the required construction documents like Lighting & Power Wiring Layout, Panel Schedule, and Material List. Also, our professionals are excel in constructability analysis and point cloud creation.

Electrical
FIRE PROTECTION
DETAILING

Fundamental to every building project is fire protection systems that will provide the opportunity to reduce fire damage by way of automatic and manual fire extinguishing systems.

Our Fire protection BIM Services includes,

●      3D Modeling of Fire Protection System

●      Fire Fighting Design Validation

●      System Coordination and Clash Resolution

●      Fire Protection Shop Drawings (Spooling Layout/Pre-Fabrication)

VIEW MORE

Building information modeling (BIM) has been used in various forms throughout the fire protection industry. However, most of the BIM work has been focused on stand-alone models that have historically been proprietary to the contractors that developed them. Specifically, fire sprinkler and fire alarm contractors have been using 2-D and 3-D models of their respective systems, but that has historically been the limit. As BIM technology improves and moves outward from structural and architectural models, the fire protection industry as a whole reaps the benefits because fire protection engineering encompasses not just active and passive suppression systems, but the overall life safety of buildings and the occupants. If the model is being constructed for all systems, life safety integration can be better applied throughout. Fire sprinkler contractors have been using specialized and limited forms of BIM for many years. Customized programs allow sprinkler designers to develop systems in 3-D models and automatically prepare hydraulic calculations, print lists of system components, and even put hangers and bracing on drawings based upon pipe sizes and dimensions. All of these tools are extremely useful for the designer but did not really go beyond the designer, except on paper. They also have been limited to the specific system application rather than shared with the building model. Similarly, fire alarm drafting programs have been developed that allow designers to build systems that automatically assign network addresses to devices, calculate voltage drops, perform battery calculations, and prepare riser diagrams. These tools can significantly improve designers’ efficiency by automatically performing tasks that would otherwise take hours, days, or weeks to complete. Once again, however, the program technology historically has not gone beyond the designers’ offices.

Fire Protection
FABRICATION
SPOOLING

BIM enables digital design-to-fabrication workflows for all building disciplines. A pipe spool drawing is a useful MEP tool for plumbers as it enables them to understand how to assemble a pipe spool and its components. And it also provides all the information required for fabrication manufacturing and assembly pipe spool drawings to ensure that nothing goes wrong And makes sure time and money are not misspent. Pre_Fabrication helps our contractors to improve quality, handle materials and reduce construction costs.

Our Fabrication Cad Spool Drawing Services,

●      Graphics

●      Bill of Materials

●      Title Block

●      Pipe Size and Cut Length

●      With Item Numbering

●      With Material Description

●      With Pipe Bending Data

●      With a List of Pipe Pieces

​

 

VIEW MORE

Our engineering team has many years of experience producing accurate Shop and Fabrication drawings across multiple trades and We also ensure that the drawings are delivered as per the industry standards and appropriate formats & layouts as required by the client.

Fabrication
REVIT FAMILY
CREATION

Creating BIM families or content for BIM models is one of the crucial and prominent parts of BIM services. Revit is an efficient architectural design and documentation software of Autodesk Corp. and Revit family creation services focuses on creating basic parametric families like furniture and equipment. It enhances the graphics quality of the project models by modifying the different BIM families. All professionals engaged in construction process like builders, manufacturers, designers, engineers etc. depend on Revit Family model creation services, as it can create more intelligent, smart and parametric models and can bring in a complete assembly of objects component or equipment that will facilitate Building Information Model construction.

Our Revit Family Creations Services,

●      Architecture Family Creation

●      Structural Family Creation

●      MEP Family Creation

●      Building System Families

●      Bim Families

●      Structural Components

●      MEP Revit Families

●      Fixtures, Custom Applications

●      Partitions, Windows, Walls, Doors

●      Related Custom and Supporting Content

 

VIEW MORE

Our expertise is in working in the Revit environment. We have many years of BIM experience, which gives us that edge to deliver parametric and non-parametric family creation services along with Quality, Bill of Material, Level of development, and Reusability. With Revit family creation, we provide swiftness and accuracy to the Revit modeling of the AEC project When we create a strong Revit family with providing intrinsic information about all the model elements, the created BIM model will have a solid micro informative Building Information Model.​

Revit Family
POINT CLOUD
SERVICES

Our Company tries to make projects run more efficiently and easier to manage by using 3D Scanning. By implementing 3D scanning we intend to improve production, accelerate communication and save cost. One of the many benefits of utilizing 3D Scanning Services can be measured in the amount of money that can be saved on different projects. There are 5 ways to save AEC industry money by using 3D scanning are;

●      Weeks worth of work can be done in days - 3D scanning helps us to measure large space or highly decorative facade in small                 fraction of time. This means fewer hours on-site, less manpower wasted and no missing information.               

●      Level of Accuracy- 3D scanning has high definition line-of-sight laser and high-resolution camera in which 10,000 sq.f space can           be measured with ⅛” of accuracy or better. This reveals deviation from design and flaw in construction and it prevents it from               happening and it could help us to reduce a huge amount of cost.      

●      Ability to Scan Building While occupied - 3D scanning can take place after hours which does not affect the day to day routine of               workers. Scan data can be used to recreate buildings digitally, which eliminates the need to visit the site multiple times.          

●      Early Decision making Prior to Design Planning-  At the beginning of any project due to unknown reasons, the Project gets                      delayed on the site which costs 12-15% of the total cost of the project. With 3D Scanning, the cost can be reduced to 1-3% since            scanning provides a tremendous amount of information early in the beginning stage itself.              

●      Speed up project completion -  The main goal of our company is to complete the project quickly with accuracy and reduce the                cost of the project and make a profit. Since 3D scanning is used The as-built is submitted to the AEC Professional in which they              can only focus on design instead of wasting time and resources measuring and developing the existing condition of the project              Laser Scanning technology allows for clearer vision of the project and more confident decision to be made in the early stage of              the design process itself to save money in the long term.

 

VIEW MORE

We can create a point cloud as simple or complex as the customer requirement and Our point cloud creates accurate models for as-built purposes as well as for refurbishment and renovation projects, We also provide solutions in enabling coordination of existing structure with a new one or to create a topographic map of the data for the retrofitting of facilities.

Point Cloud
SOLIDWORKS
SERVICES

Solidworks designs and develops 3D Software tools that enable to Create, Simulate, Publish and Manage their data, SolidWorks is parametric in nature which means that the dimensions and relations drive the geometry, not the other way around. The dimensions in the sketch can be controlled independently, or by relationships to other parameters inside or outside of the sketch. So, the customer will get a fine finished product as he/she requested. Views are automatically generated from the solid model, and notes, dimensions, and tolerances can then be easily added to the drawing as needed. Drawings can be created either from parts or assemblies

Our Solidworks Services,

●      3D Model Creation  (Part Creation, Assembly Model)

●      Manufacturing 2D Drawings

●      Bill of Materials

●      Sheet Metal Modeling & Developments

●      Structural Modeling

●      Welding Simulation

●      Concept Design and Realization

●      Tubing, Piping, Cable, PCB

 

VIEW MORE

We have several years' expertise working with SolidWorks, which gives us that edge to deliver the Components on time with 100% quality.

Solidworks
Contact

CONTACT

For inquiries, please contact:

phil.duong@digitaldesigngroup.com

(949) 923-9895

LOGO UPDATED.png

@2000 Digital Design Group All Rights Reserved

Digital Design Group

bottom of page